|
|
Build Your Online Product Catalogs?
| Product Name: |
Single-component waterproofing coating
|
| Supply Ability: |
10000 |
| Related proudcts |
waterproof coating, |
| Specifications |
25kg/barrel |
| Price Term: |
FOB CNF CIF |
| Port of loading: |
qingdao port |
| Minimum Order |
1000 |
| Unit Price: |
2dollas/kg |
|
Single-component waterproofing coating is a polymer waterproof coating of reactive type of moisture-curable film. It is made of isocyanate and polyether as main material, mixing with solid agents, plasticizers and other additives using special technology by high temperatures dehydration and polymerization. Coating it in the surstrate, through the reaction between NCO end group in polyurethane prepolymer and moisture in air, which forms tough, soft and jointless rubber waterproofing film on the substrate.
Product characteristics
Single-component waterproofing coating, easy to apply, the requirement to moisture content of the base is not high, it can be applied on the more moist surface, also available on the surface it's relative humidity is more big.
Polyurethane coating film has high strength and elongation, good elasticity, good high temperature and low temperature resistance, and high adaptability to substrate shrinkage and cracks.
Can coat 1mm to 3mm thick one time, coated film is dense, no bubbles, and high bonding power.
Not necessary to brush the substrate treatment agent on the various substrate which is up to the standard
Applicable scope
Widely used in roofs, basement, toilet, swimming pool, and all kinds of industry and civil building waterproofing
Technical property
[Execute standard GB/T19250-2003]
No. Item Index
I II
1 Solid content%?80
2 Dry time of outside/inside h?drying time of outside 12
drying time of inside 24
3 tensile strength ***?1.9 2.45
4 Fracture elongation%?550 450
5 Water impermeability 0.3***,30min Impermeable
6 Bending at low temperature?-40
7 Bonding strength of moistbase ***?0.5
A.only use the moist substrate of underground project.
Application technology
Substrate need be firm, smooth, no sundries, inside corner and outside corner should be made into circular arc, the diameter of insider corner should be more than 50mm, and the outside corder should be more than 10mm.
In |
| Company: |
weifang hongyuan waterproof materials co.,ltd
|
| Contact: |
Ms. ellen yu |
| Address: |
taitou town shouguang city, shandong province |
| Postcode: |
262700 |
| Tel: |
+86-0536-5526955 |
| Fax: |
+86-0536-5526955 |
| E-mail: |
|
|
|
|
Home
